Powder Coating Equipment – This technology provides a very hard durable finish compared to liquid paint. The powder travels through the powder gun and an electrostatic charge is applied to the powder which is sprayed to a grounded substrate. The electrostatic charge on powder adheres the powder to the substrate. The powder part is baked in either a convection or infrared oven. The baking process causes the powder particle to become molten and flow out over the surface.
Powder is supplied to the powder applicator through either a vibratory box system or a hopper system. The vibratory box systems pumps the powder out of the powder box through the powder hose to the powder gun. The hopper system is a 50 pound container that holds a box of powder. The hopper system pumps the powder out of the hopper through the powder hose to the powder gun.
Powder Coating Booth – powder is applied in a powder coating booth that captures the powder over spray. The powder booth can be either a 3 stage filtration system or cartridge filtration system and both system exhaust the air back into work environment. The 3 stage filtration system is for low volume applications and the cartridge powder recovery system is for high volume applications.
Crossdraft Design – The simplest configuration, crossdraft booths use an exhaust fan to pull air end at one end of booth. Air may pass through a filtered door, enter the working chamber filtered or be through a pressurized intake plenum. Air flows parallel to the floor, across the product and into a filter bank at the booth rear.
Side Downdraft Design – Side downdraft booths are an economical solution for shops that aren’t able to install a pit. Air comes into the booth through a full length, filtered ceiling plenum, and flows downward over the product. When air reaches the floor, it is pulled into floor level filtered exhaust plenums on either side of the booth.
Downdraft Design – Generally accepted as the best airflow style, downdrafts booths do an excellent job at the controlling overspray and contamination. Air enters the booth through a full length, filtered ceiling plenum. From there, air flows vertically over the product and into the filtered exhaust pit in the floor. Filter media is supported by secondary grating, enabling balanced air distribution and maximizing filter utilization.
Convection Batch Ovens – Cures liquid paint and powder coatings – Gas or Electric operated – Double doors on front of oven – 6” Insulated panels – burner box that can be roof mounted or rear mounted – adjustable air plenum ducts inside oven – exhaust stack – control panel. Ovens can be suppled erected or knocked down in a do it your self kit. Available in a wide variety of widths, heights and depths.
Conveyorized Ovens – Convection or Infrared – Cures liquid paint and powder coatings – Gas or Electric operated – Convection oven 6” Insulated panels – burner box – adjustable air plenum ducts inside oven – exhaust stack – control panel. Infrared ovens – two sided infrared oven – multiple heat zones depending on length of oven – steel framing – oven exhaust and control panel
For more information: Rapid Ovens
Sandblasting – Complete portable pot system – Sandblast Cabinet systems – suction feed or pressurized – Complete Blast rooms – pneumatic media recovery includes abrasive recovery system and dust collector – mechanical media recovery style includes screw conveyor and bucket elevators to convey abrasives into the recovery system and dust collector. For more information: IST: Suction Blast Cabinet with Reclaimer ECAB Series-General, IST: Blast-M Pressure Series, IST: Blast-Abrasive-Blast-Rooms
Chemical Pretreatment Systems – Cabinet parts washers – Manual spray wash pretreatment station – Conveyorized – multiple stage (3,5,7) spray system – number of stages of washer is dependent upon chemical supplier recommendation.